BULLBLOCKS & INLIINE WIRE DRAWERS
| #99A-3562 | 30"
Horiz, WIREMATIC #HBB30-75; variable speed 102 to 267 FPM, 75 HP
|
| #99A-3955 | Vaughn #22; 24" x
125 HP DC Pushup block for shapes; 24": 101 to 305; 25:1 Ratio; w/controls
|
| #99A-3956 | Vaughn #26; 30" x
200 HP DC Pushup block; for shapes; 75/300 FPM; 32:1 Ratio (Available at additional cost:
36" block with high riding stripper; total dia. 66")
|
| #99A-4067 | Vaughn Model 18SD
Vertical Bullblock; start rod: .750" (19mm); 30" block; 125 HP DC
motor; 500V; 400/1200 RPM
Spare
30" stripper block: |
| #99A-4070 | Custom
made Bullblock; 18" block; 15 HP AC motor with 20:1 gearbox; GE AC
digital electrical controls; motor & electrical drives new, never used
|
| #99A-4078 | Custom
Engineered Bullblock: wire or tube: 18" x 15 HP DC; 45:1 ratio; GE
SCR PLC controls; recirculating coolant tank
|
| #99A-4087 | Wire
Machinery/Wirematic 36" x 100HP Horizontal Bullblock; Model 36/100BB
|
| #99A-4094 | Herborn
Model EG-1 Double Deck Bullblock; 30"/22" Block; max. wire dia.
w/double draw start .218" - finish .188"; 2nd draw: .188" to .148"; single
draw max. .437" - finish .375"; 120 HP AC (90 KW) motor; 3 speed gearbox;
max. speed 900 FPM approx.; Furnace AC electrical controls; high riding
stripper; spare 30" single block (only 1 die box available)
|
| #99A-5100 | Shaving
Line, mfg: Acme Machine Works, process wire diameter aluminum: die
box start: .225"-.220" (possibly larger), draw reduction to .210", process
shaving .225"-.210" + down to .125" approx., shave reduction .025"-.030",
die box, shaving head, 60 HP main drive motor; Unwind stand-payoff; 15 HP
Spooler; Dust Collection System; electrical controls
|
| #99A-5101 | Shaving
Line, Aluminum; process size: .225 to .220" + down, process shave
.025"-.030" reduction, block dia. 20" x 1-5/8" face, shaving head, 40 HP
Baldor motor, 1750-2100 RPM: 150/300 field volts, approx. 800 FPM; Syncro DF
Spooler: 22" x 11" traverse: 10HP - 1750-2300 RPM
|
| #99A-5102 | Shaving
Line, Aluminum; process size: .225 to .220" down, process shave
.025"-.030" reduction, block dia. 20" x 5" block face; shaving
head-die box; 40 HP motor with custom built transmission
|
| #99A-5116 | Custom
made 28" Bullblock; last drawing 3/8" (9mm) rod; 6:1 ratio; 125HP
AC Motor; 1185 RPM; 480V; 1 HP Baldor Motor/Pump Oil Recirculating System;
Electric clutch & brake; Allan Bradley SMC Plus AC Electrical Controls; Hi
Ridding Stripper
|
| #99A-5121 | Frigerio
Double Deck Bullblock; 24"/18" x 70kW DC (93 HP) Motor; start 9mm,
double deck 6.5mm; water cooled blocks, die boxes; self-contain wire coiling
device; overhead wire drop to stems
|
| #99A-5124 | Roth Rod
Ribbing Line, deformed wire; wire dia: 6 up to 16mm; double block
bullblock: 750/580mm; 132KW AC motor; 50 Hz; 380V; 4 speed Gear Box; max.
speed 10.415M/sec; (1) 6-roll Profile/Ribbing Head; single spooler: mfg. GSG:
bobbin max. dia: 1200mm; bobbin max. width: 1000mm; max. weight 2500 to 300
kgs; 30KW AC motor; electrical controls new 1997
|
| #99A-5125 | Roth/Kolbus Drawing/Ribbing Deforming Line; max. wire: 12mm; max. line speed: 5.5M/sec; 6-roll ribbing head (Kiener); double deck Bullblock (Roth); 750/600mm: 90KW AC Motor; 380V-50Hz; 4-speed gear box; single horizontal spooler: Kolbus; bobbin dia: 1000mm x 1150mm width |
| #99A-5128 |
Breitenbach Single Deck Bullblock; 32" block; 125HP with 3-speed
gearbox: 1.0-2.0M/sec; 1.5-3.0M/sec.; 2.2-4.4M/sec.; Cleveland Pacemaster
SCR electrical controls
|
| #99A-5129 | Vaughn
#13 Bullblock; 30"x 75/100HP DC motors; hi-riding stripper; Mentor
PLC SCR controls; payoff tower
|
| #99A-5130 | Renco
Skin Pass Inverted Drawblocks; 26" block dia. x 3" face; 8% draft
reduction; wire dia. start: .250" approx.; 25HP DC motors; Sabina OEM drive
controls; turntables, payoff stands; 2 complete units: each unit 2 blocks,
total 4 blocks
|
| #99A-5131 | Vaughn
Model #19 Bullblock; 30" block; max. rod start: .625" (16mm);
60/75HP DC Reliance Motor; 650-1800 RPM; 170-472 FPM on 30" block; ratio
30:1; 11,647 lbs. pulling force; hi-riding stripper; Reliance 75VS static
Unidrive electrical controls
|
| #99A-5132 | Vaughn
Model #18 Bullblock; 30" block; max. start rod: 1.00" (25mm); 125HP
DC Motor; 400/1200 RPM; 126/377 FPM; ratio 25:1; 32,738 lbs. pulling force;
spider stripper; Bonko SCR electrical controls
Dies available at additional cost:
|
| #99F-5119 | RMG
Model 56-1056-87 Autodraw Inline Wire Drawers; 24" block; max. wire
dia. alloy: .250"; mild steel: .312" approx.; the units are reverse hand
frame construction-left to right wire flow; 3.7 to 56 FPM; 10HP;
440V-3Ph-60Cycle; inverter drive; Cutler Hammer electrical controls; machine
purchased new, never put in production; 2 available.
|
| #99F-5120 | RMG
Model 45-10103-87 Autodraw Inline Wire Drawers; 20" block; max.
wire dia. alloy: .250"; mild steel: .312"approx; these units are reverse
hand construction-left to right wire flow; 6.8 to 103 FPM; 10HP;
440V-3Ph-60Cycle; inverter drive; Cutler Hammer electrical controls;
machines purchased new, never put in production; 5 available
|
Gavlick Machinery Corporation |
| 100 Franklin Street, Bristol, Connecticut 06010, USA |
| Phone: 860-589-2900 Fax: 860-589-0863 |
| e-mail: sales@gavlick.com home: www.gavlick.com |
