| DRAWING MACHINERY, ROD |  |
| DRAWING MACHINERY, ROD | |
| #99D-3945 | Morgan 6/7B; (6)
22" Blocks; 7 Die; 125 HP DC; 2250 Finish Speed; Start .217" L.C.
|
| #99D-4080 | Syncro
18T-7 Tandem Rod Breakdown Machine; cu., al.; max. entry: 1/2" -
9/16" (12.7-14.28mm); finish: .257"-.051" (6.6 to 1.3mm); finish speed: 2035
FPM; 7 die; 7 block; internal blocks: 18", finish block: 22"; 250 HP AC with
4 speed Philadelphia gearbox; Syncro T-1 30" x 30HP Spooler
Machine:
Capstans:
Spooler:
Electrical: |
| #99D-4086 | MILL
Model TV-22/2, TV-13/2, TV13/R + TRSO600 Wire Drawing Line;
7 die/pass; wire drawer 5 block;
1st block double pass; 2-5 single; block dia: 550"mm (22"); motor power:
60/30CV per block; wire dia enter: 5.5-7.0mm (.216"-.275"); wire finish:
min-max. 1.8-2.6mm (.070"-.102"); max. speed: 11M/sec (2200 FPM); Mill
drawing deadblock coiler with inverted Roseta lay take-up block dia. 600mm
(24")
|
| #99D-4099 | Vaughn
Model DST Wire/Rod Drawing Lines, .375"(10mm) max. alum. rod -
.187"-.080", continuous with 200HP DC motor; motorized spooler-100HP DC
motor; 22"/30" dia. take-up frame (2 avail.)
Machine #1: Machine #2:
|
| #99D-5103 |
Arboga-Morgardshammer Model DG-5 5-block Rod Drawing Machine; (5)
five X 28" blocks x 52kW (70 HP DC) motors; 950-1900 FPM; last draw 1/2"
(.500") aluminum. Has capability to draw ferrous materials.
Equipped with original controls & MG set.
|
| #99D-5104 | Vaughn
3HRX Rod Breakdown Machine; 30" block x 60 HP DC motors; ratios:
8.75 - 6.56 - 4.373; speeds: 358-1435; 478-1914, 718-2872; rod start: Al.
.500" (1/2") controls upgrade
|
| #99D-5136 -SOLD-
|
-SOLD-
Vaughn
5/6HRM Motoblox Wire Drawing Machine; presently set up as 5HRM,
single die on first block; start wire dia: .280"-.216", finish: .120"; HC-L.C.;
block dia: 1 thru 4: 26" x 40/50/69 HP DC motors; 500/2500 FPM; 30"
horizontal stationary drawing deadblock; 40/50/69 HP DC; Machine Technology-Bonko
SCR electrical controls; 400KVA transformer
|
| #99D-5142 | Frigerio
12-Block/Die Wire Drawing Machine; Model Rt680/9-Rt60/3; Rt680/9
block dia. 680mm (26.77") x 114.4kw (153.54hp) per block; Rt600/3 block dia.
600mm (23.62") x 58.5kw (78.44hp) per block; max. wire start: 8mm (.314");
finish wire dia 1.00-2.60mm (.039"-.102"); material: low & high carbon;
drawing speed: 18M/sec.; air & water cooling; motors air cooled; electrical
controls: EEI PLC SCR
|
|
#99D-5143 -SOLD- |
-SOLD-
Tecnoimpianti 8-Block/Die Wire Drawer; model BTR560-8; 8 x 40kw
(53hp) DC per block; block dia:
580mm (22.83"); start wire dia. 7mm (.275"); finish: 1.8mm (.070"); speed:
25Meters/sec.; air & water cooled blocks; water cooled dies; rotating die
holders; twin drum vertical payoffs; mechanical descaler: 4 offset rolls: 4
horizontal rolls; 900mm traversing spooler with 20 extra spools; electrical SCR
controls; misc. spare parts.
|
|
#99D-5144 -SOLD- |
-SOLD-
Vaughn
Model 7/8 HIVX Motoblox; wire dia. start: .220 (5.5mm), finish:
.069 (1.7mm); 7 block - 8 die: 1st block double deck x 45HP DC; block 2 thru
7: 14" x 33HP DC; finish block: 22"; drawing speed: 1000/3160 FPM; blocks
air & water cooled; 25% reduction; blower motor cooling fan; 45HP DC -
1000/3000 RPM; 33HP DC: 1350/4000 RPM - 240V DC; Burton electrical controls
|
| #99D-5145 | Vaughn
5/6 HRM Motoblox; 5 block- 6 die; 1st block double deck 20"/26";
blocks 2-5: 26"; motors 1 thru 5: 40/50/69 HP DC; 230V/345V; 500/1800 RPM;
wire dia. start: .268" hi carbon (6.8mm); finish: .120" + finer (3.0mm);
block air & water cooled; die holders; water cooled; drawing speed: 500/1500
FPM by voltage control; 1500 to 2500 FPM field control
Electrical controls:
|
| #99D-5153 | Vaughn
Model 4/5 HRS Wire Drawing Line; 4 block - 5 die; 1st block double
deck 16"/20"; intermediate blocks: 22" (4) 40HP DC motors; wire dia. start:
.216"-.205"; finish .075" (1.9mm) approx.; air & water cooled blocks; Vaughn
24" x 40HP DC drawing deadblock; powered turntable; custom made dual 6000 lb. cap.
tower payoff - mechanical lift Note: Vaughn 4/5 Wire Drawer sold. Payoff, tower, deadblock, turntable available
|
| #99D-5154 | Vaughn
3/4 HRS Wire Drawing Line; 3 block - 4 die; 1st block: 16"/20" x 40
HP DC motor, 20" x 33 HP DC intermediate; 24" x 33 HP DC finish; wire dia.
start .216" approx.; air-water cooled blocks; Vaughn 24" x 33 HP DC motor
drawing Deadblock; powered turntable;
custom made dual 6000 lb. cap. tower payoff - mechanical lift; no descaler
Machine:
Vaughn Deadblock 1 reconditioned:
Machines goes with Ref. #99D-5156
Vaughn Deadblock 2 reconditioned: |
| #99D-5155 | -SOLD-
Vaughn
4/5 HRS Wire Drawing Line; 4 block - 5 die; 1st block double deck:
16"/20"; 20" intermediate blocks; 24" finish block; (4) 33HP DC motors; wire
dia. start: .216"-.205"; finish: .075" (1.9mm) approx.; air-water cooled blocks; Vaughn 24" x 40HP DC motor;
drawing Deadblock; power turntable; Eiwa model ED-CD-8 Descaler-mechanical-brush-coat-heat;
custom made dual 6000 lb. cap. tower payoff; mechanical lift; Reliance
cardpak drives
|
| #99D-5156 | Vaughn
4/5 HRS Wire Drawing Line; 4 block - 5 die; 1st block double deck:
16"/20"; 20" intermediate blocks; 24" finish block; (4) 33 HP DC motors;
wire dia. start: .216"-.205"; finish: .075" (1.9mm) approx.; air-water cooled blocks; Vaughn 24" x 40 HP DC
drawing Deadblock; power turntable; single 6,000 lb. payoff - mechanical lift;
no descaler
|
|
#99D-5157 SOLD |
Vaughn
3/4 HRS Wire Drawing Line; 3 block - 4 die; 1st block: 16"/20" x 40
HP DC motor; 20" x 33 HP intermediate; 24" x 33 HP DC finish; wire dia.
start: .216"-.205" approx.; air & water cooled blocks; Vaughn 24" x 40 HP DC
motor; drawing deadblock; powered turntable; Eiwa model EC-CD-8 Descaler:
mechanical-brush-coat-heat; custom made dual 6,000 lb. cap; tower payoff,
mechanical lift SOLD
|
|
#99D-5158 SOLD |
Vaughn
5/6 HRS Wire Drawing Line; 5 block - 6 die; 1st block: 16"/20" x
50HP DC motor; 20" x 50HP DC motor intermediate blocks; 24" x 50HP finish
block; wire dia. start: .216"-.205"; air & water cooled blocks;
Morgan model DB24 drawing Deadblock; 22" x 50HP DC motor; 2200 to 3000 FPM
approx.; inground turntable; Tainan Cheng model MDC-10L Descaler-mechanical-brush-coat-heat;
custom made dual 6000 lb. cap. payoff, mechanical lift
SOLD
|
|
#99D-5159 SOLD |
Vaughn
5/6 HRS Wire Drawing Line; 5 block - 6 die; 1st block: 16"/20" x
50HP DC motor; 20" x 50HP DC motor intermediate blocks; 24" x 50HP finish
block; wire dia. start: .216"-.205"; air & water cooled blocks;
Morgan model DB24 Drawing Deadblock; 22" x 50HP DC motor; 2200 to 3000 FPM
approx.; inground turntable; Tainan Cheng model MDC-10L Descaler-mechanical-brush-coat-heat;
custom made dual 6000 lb. cap. payoff, mechanical lift
SOLD
|
| #99D-5172 | Mill MTR
Wire Drawing Machine; (4) block 650mm / 4 blocks 560mm x 68 kw DC
(91HP) 1st 4 blocks; 78 kw DC (104HP) last 4 blocks; max. inlet: 7mm L.C.-H.C.;
min. outlet: 1.50mm (.059") (1006 to 1080); air and water cooling; max.
speed: 15M/sec.; (3000 FPM approx); vertical drawing static deadblock coiler
650mm x 35kw DC (26" x 46" HP DC); new 1988 - reconditioned 2006
|
| #99D-5175 | Eurodraw
Model MTS 610/9 Wire Drawing Machines; 9 x 610mm (24") x 45 KW AC
(60HP); wire inlet: 5.5mm (.216"); wire exit: 1.60-1.80mm (.062"-.070");
reduction per draft: 16 to 24%; 20M/sec. (4000 FPM approx.); water & air
cooled blocks; rotating die boxes; horizontal spooler: 1000 DIN; power:
380V-50 cycle - 3 phase; electrical control SIEI Sistemi PLC; 2 available;
new 1997-1998; no payoff or descalers available
Machine #1
Machine #2
|
| #99D-5176 |
Morgan Model 6-BW Wire Drawer; 6x22” blocks; 200HP AC motor; start wire: 6.0-5.5 (.236”-.216”); finish: 3.1-1.9mm (.122”-.074”); 6 die; speed: 1550-2725 FPM approx.; L.C.–med–hi carbon; Morgan DB-24 deadblock coiler; 75HP x 26” block; max.-min. wire: .187”-.062”
|
| #99D-5177 |
Morgan
Model 6-BW Wire Drawer; 6x26” blocks; 200HP AC motor; 2 speed gearbox;
start wire: 6.0-5.5 (.236”-.216”); finish: 3.1-1.9mm (.122”-.074”); 6 die;
speed: 1550-2725 FPM approx.; L.C.–med–hi carbon; Morgan DB-24 deadblock
coiler; 75HP DC x 26” block;
max.-min. wire dia: .187”-.062” finish
|
| #99D-5184 | Redaelli
9 Block/Die Wire Drawing Machine; max. inlet 6mm; outlet 1.6mm
approx low carbon; 550-600mm block diameters; speed: 13m/sec (2836 FPM
approx); 9 AC motors (40HP approx); dual vertical payoffs; mechanical
descaler; horizontal spooler max. weight cap. 2000kg; 2 rotating dies; anti
torsion capstans
|
| #99D-5185 |
Tecnoimpianti 7 Block/Die Wire Drawing Machine; OTO accumulative;
max. wire start: 5.5mm; wire finish: 1.8mm low carbon; 550mm blocks; (7)
seven 30kW (40HP) per block; speed: 9m/sec (approx. 1800 FPM); vertical
spooler: 28kW (37HP); max. spool weight 1000kg; dual vertical payoffs;
mechanical descaler; rotating die first block; electrical controls
|
| #99D-5186 |
Tecnoimpianti 5 Block/Die Wire Drawing Machine; max. wire start:
5.5mm; outlet 2.2mm approx.; speed: 9m/sec (1800 FPM); 5 AC motors 30kW each
(40HP); dual vertical payoff; mechanical descaler; vertical spooler 28kW DC
motor (37HP); rotating die at first block; torsion capstan; electrical
controls
|
| #99D-5189 | Team
Meccanica Model TD610/9 Straight In-Line Wire Drawing Line; 9
blocks x 610mm (24") x 45 kW AC motors; inlet wire dia. 6.5-5.5mm
(.255"-.216"); outlet: 1.6-3mm (.062"-.118"); max. speed: 20M/sec (4000
FPM); static coiler MO610; EEI PLC electrical controls; vertical payoff
SV5(new); mechanical descaler(new)
|
| #99D-5190 | OZ CAMZ
Model RT500/7 Straight Inline Wire Drawing Line; 7 x 500mm(20") dia.
blocks; 37.5 kW/block; inlet wire dia: 5.5mm, outlet: 1.6mm .062" approx. dancer control
each block; max. drawing speed 15M/sec (3000 FPM approx); horizontal spooler
for spools DIN800 (32.5 kW); new vertical payoff with 2 rod holding reels; new
mechanical descaler, motors & electrical controls/cabinet D.C.
|
| #99D-5191 | Frigerio
Model RT500/7 Wire Drawing Line; 7 x 500mm(20") blocks; 38
kW/block; inlet:
5.5mm (.216"), outlet: 1.6mm (.062"); dancer control each block; max.
drawing speed: 15M/sec. (3000 FPM approx.); horizontal spooler (25 kw), DIN800 spool dia.; new vertical payoff with 2 rod holding reels; new mechanical descaler,
motors & electrical controls D.C.
|
| #99D-5194 | Frigerio
Model RT600/7 Wire Drawing Line; 7 x 600mm blocks; blocks 1-5:
52kW, block 6: 49.4kW; straight-thru dancer control; start dia. 5.5mm;
finish: 1.6-2.0mm low carbon; max. speed: 15-18M/sec. (3600 FPM approx.);
horizontal spooler: DIN 800 (23.8 kW); motors and electrical cabinets; DC
motors-controls
|
Gavlick Machinery Corporation |
| 100 Franklin Street, Bristol, Connecticut 06010, USA |
| Phone: 860-589-2900 Fax: 860-589-0863 |
| e-mail: sales@gavlick.com home: www.gavlick.com |
