STRAIGHTENERS & CUTOFFS    scroll down to see complete list
 

#627-933 Vale Model V-35 (D-1508) Bar/Rod Shear; hand operated; 1.25" rod cap. (31.8mm); 5000 PSI power cap.; 55,000 PSI strength cap.; 2 available; (1) with 5HP, (1) with 3HP power pack

                    

#627-980 Vale Bench Mounted Hydraulic Cutoff Shear; 1" max. rod; 65 ton shear press; 5,000 PSI power unit; hydraulic feed; sensor control cutoff control
#627-985 Shuster Model 200V Torsion Straight & Cut Machine; hi tensile wire: .015" to .062"; mild steel wire: .020" to .080"; twin hi speeds arbors; 3' runout track
#627-992 Shuster Model 1AVS-5; wire dia. range: .062" to .250"; basic wire; 50 to 200 FPM; 20' runout track; Reeves vari-drive 5HP motor
#627-993 Lewis 2SV5-189-3 Straight & Cut Machine; wire dia. range: .062" to .312"; 3' runout track; minimum cutoff: 1"; 65 to 250 FPM, variable speed; 160ppm up to 12"; dual center straightening arbor; 5 die; 15HP - 1800 RPM; height to center of wire: 47"
#627-994 Lewis 2CV4-434-3 Straight & Cut Machine; wire dia. range: .062" to .250"; 3' runout track; minimum cutoff: 1"; variable speed range 65 to 200 FPM; 145ppm up to 12"; 7-1/2 HP Reeves drive; height to center of wire: 45"
#627-995 SOLD Lewis Model 8-F Travel-Cut Straight & Cut Machine; Flying Shear; wire dia. range: 5/32"-3/8" (.157"-.375") (4.0-9.0mm); .312" hi carbon; speeds: 110 up to 195 FPM; 9' runout track; four-speed and two-speed; straightening arbor: 5 pairs of dies @ 3-5/8" centers; 3250 RPM; rear feed & straightening housing: 4 straightener rolls + 4 feed rolls; front feed housing: 2 sets of 2 feed rolls; cutoff: crank actuated traveling head with cam cutoff; 25 HP motor @1200 RPM  SOLD
#627-996 SOLD Lewis Model 8-F Travel-Cut Straight & Cut Machine; Flying Shear; wire dia. range: 5/32"-3/8" (.157"-.375") (4.0-9.0mm); .312" hi carbon; speeds: 110 up to 195 FPM; 12' runout track; four-speed and two-speed; straightening arbor: 5 pairs of dies @ 3-5/8" centers; 3250 RPM; rear feed & straightening housing: 4 straightener rolls + 4 feed rolls; front feed housing: 2 sets of 2 feed rolls; cutoff: crank actuated traveling head with cam cutoff; 25 HP motor @1200 RPM     SOLD
#627-997 Lewis Model 9-F Travel-Cut Straight & Cut Machine; 18' runout track; .250" to 1/2" (6.3 to 12.2mm) basic steel; .375" (9mm) high carbon; flying shear; speeds: 90 up to 195 FPM; four-speed and two-speed flywheel transmission; rear feed: 4 straightening rolls + 4 feed rolls; front feed housing: two sets of two powered feed rolls; cutoff mechanism: crank-actuated travel head with cam cut-off: machine drive: 40 HP, 1800 RPM

 

#627-998 Shuster 1AVS5 Straight & Cut Machine; wire dia. range: .062" to .250"; max. cutoff length: 60" (5 ft.); 5HP vari-speed motor; 20 to 200 FPM; Shuster Model R500 Payoff Reel
#627-999 Shuster 1AVS5 Straight & Cut Machine; wire dia. range: .062" to .250"; max. cutoff length: 72" (6 ft.); 5HP vari-speed motor; 20 to 200 FPM
#627-1000 Lewis Model 8-F Travel-Cut Straight & Cut Machine; Flying Shear; 5/32"-3/8" (.157" to .375") (4-9mm); .312" high carbon; speeds: 110 up to 195 FPM; 12' runout track; four-speed and two-speed; straightening arbors: 5 pairs of dies @ 3-5/8" centers; 3250 RPM; 4 straightening & 4 feed rolls; front feed housing: 2 sets of 2 feed rolls; cutoff: crank actuated traveling head with cam cutoff: 25 HP motor @ 1200 RPM

Reconditioned:   

Run-out Track:

#627-1001 Lewis Model 10-F Travel-Cut Straight & Cut Machine; Flying Shear; 17' runout track; .375" to .625"; 90-120-155-200 FPM; 4 speed transmission; 4 straightening rolls - 4 feed rolls; two sets of 2 powered feed rolls; cutoff mechanism: crank-actuated travel head with cam cutoff: machine drive 50HP DC, V-belts; catalog information upon request

Reconditioned:

Run-out Track:

Tooling:

#627-1002 VASPO Hi-Speed Straight & Cut Machine for welding electrodes; Model SD-02; Year mfg: 2001; max. wire feed speed: 6.375 M/sec.; max. machine working capacity: 850 cuts/min.; diameter of processed wire: 4-5mm; length of processed wire: 450 + 0.5mm or 900 + 1mm (with half machine cadence)

Available separately at additional cost: Second Hand Tilting payoff device for spools or coils with rotating table  and brakes (it is possible to use for pay-off). Max weight of wire 1200 kg, max pay-off  speed 6 m/s. Rotation no powered. Revised, new engine for tilting (photos available upon request of quote.)
#627-1005 Lewis Model 20 FHA Shape Straight & Cut Machine; capacities: .312"-.625" (8.0-15.8mm) square and hexagonal or equivalent area in flats to 2" wide; flying shear cutoff; high production-7.57MTS runout track, 24' approx.; air clutch & brake; 2 speed: 150-200 FPM; motor: 40HP - 1200 RPM; rolls & spare parts available

 

Gavlick Machinery Corporation
100 Franklin Street, Bristol, Connecticut 06010, USA
Phone: 860-589-2900      Fax: 860-589-0863
e-mail: sales@gavlick.com    home: www.gavlick.com